Bosch Dishwasher

Joined
20 Jun 2007
Messages
1
Reaction score
0
Country
United Kingdom
I have a Bosch Exxcel dishwasher which is about 2 years old and has suddenly started using too much salt so that all the dishes etc are dull and VERY salty. Having filled the salt reservoir about a week ago, it is now already empty and the salt light is back on.Usually this amount has lasted for several months. Any ideas if this intake can be adjusted?
 
Sponsored Links
You should find there is an adjuster.

Open the door,and look in the top left corner of the front of the cabinet (hidden when door is closed) for a plastic ring with a screw-slot.

I think it's clockwise for more salt, anticlockwise for less.

However I doubt it is the adjuster, more likely some kind of fault.

You are sure the salt compartment lid is sealing tightly?
 
Hi,
On the side of the softner or saltpot there is a valve which regulates the amount of soften water into the appliance, this valve could be faulty,after you have adjusted the level, if it is still salty you need to replace this valve.
Regards Darky
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top