I am fitting wall cabinets in a masonry wall (brick coated with 10mm or so of plaster). Can anyone advise me what would be the most suitable fixings
kitchen cabinet Masonry fixings
- Thread starter shaw7380
- Start date
Sponsored Links
I would go with something like these
http://www.rawlplug.co.uk/index.php?option=com_content&task=view&id=98&Itemid=34
http://www.rawlplug.co.uk/index.php?option=com_content&task=view&id=98&Itemid=34
7mm SDS drill bit, brown rawl plugs, 50-70mm x 5.0 screws.
50mm if your bricks have air-holes, 70mm if solid.
50mm if your bricks have air-holes, 70mm if solid.
thanks i will go for that
Sponsored Links
Only problem I foresee is that the inner leaf of the wall cavity construction is wimpey no fines which I feel may make it difficult to get a fixing with any of these methods, any other suggestions.
Que ?
would you care to elaborate
He means "what?" Think Manuel in Faulty Towers.
Drill test hole to find out what state the concrete is in.
Good crete - method stated earlier will work.
Not so good - Mungo frame fixings 80mm - www.acefixings.com
Craaaap - resin anchors - take your pick they're all expensive.
Good luck.
Good crete - method stated earlier will work.
Not so good - Mungo frame fixings 80mm - www.acefixings.com
Craaaap - resin anchors - take your pick they're all expensive.
Good luck.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
Similar threads
