checking heater temp. bosch washer

norbellini · 7 Aug 2008

is there a way to check if the washer is reaching the right temperature i need to run a cycle on full to clear the washer of smells . i just think it might not be getting hot enough huw do i check it. i do have a multimeter
regards

rocks1 · 7 Aug 2008

put it on 95 and wait 30 mins touch the glass is it very hot ,if so it works

norbellini · 7 Aug 2008

so this is were we are my wife did this "hot"wash last week and the glass door was cold and we have just finished a 40c wash and the washing is cold. So what to do now do i check thermostat or check the heater.The washer still goes through its full cycle ok . Any suggestions please
regards

rocks1 · 7 Aug 2008

heater duff stick a meter on it or a continuity tester , need a new one

norbellini · 7 Aug 2008

thanks a lot i will test the heater and see how we go
regards

Sleepyhead · 8 Aug 2008

norbellini said:
we have just finished a 40c wash and the washing is cold.

The washing will always be cold at the end of the program. It does 3 or 4 cold water rinses after the main wash.

norbellini · 8 Aug 2008

So how do i know everything is working temp. wise .Would it be an idea to check the first drain at the waste to see if the water is warm/ hot . See the front glass never feels hot to the touch
regards

pto · 8 Aug 2008

it's working if it was't you would get a error code up

Jack

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

checking heater temp. bosch washer

Similar threads