When we moved into our house we found our kitchen to have dimmable bulbs by means of a Varilight system (V-Pro IR). Each bulb is a 12v...
More further info. When I disconnect the switch at the door (zone wires only) touch them together and then separate them I get the chime as though...
Ok, I thought as much. Thanks. Will be in touch when I have a new one fitted and let you all know the result.
Thanks for all your help.
Yep that's correct.
ok, nothing is happening. what should have happened?
with the control panel open?
OK, Have tried that, get a constant tone, open the door but nothing happens.
Entry/Exit, Zone 3 and Tamper is lit. All the rest (which are not connected) are unlit.
Have tried the door again but still no chime from the system when the door is opened. Checked the wiring by putting an LED on the end of...
ok I have set the chime from the user. I haven't yet tested it out as it's late so I will try it out tomorrow.
I did an alarm test earlier and...
Yes I have set the chime for the entry/exit zone.
I have changed the front door magnetic switch. I've wired it in and now I got no tamper alarm (which is good) however, there is no chime...
Red / Yellow are the zone wires Blue / Black are tamper.
Red to Black - Meter Reading OL
Red to Blue - Meter Reading OL
How do I do that?
I've got my Multimeter. Do I just check the AT Wires for Voltage? I've already checked them on the ohms range and getting a...
1. PIR With Anti Tamper connected - No Tamper Light on when coming out of programming mode. YAY!
2. E/E With Tamper Connected (no...
Thanks for the help. I'll send a message on here when I've done it and let you know how I got on
is it safe now to put the E/E contact back in and the anti tamper circuit and see what happens?
Right then, I've just stretched the spring out a little and now when I put power to the box and turn it on the internal sounder sounds, I put my...
Yes it does go to constant tone. then when I release the switch it starts beeping again.
Here you go:[ATTACH]
Separate names with a comma.