Remember those sheets are prone to condensation and you can buy them fleece lined to reduce condensation.
When I do those I use 3x1 rough sawn and if there is nobody likely to walk on it then 2' centres are normal.
Reduce this to 18" if you...
Yabadabadoooooo! I'm in the big league now!
Anyone tell me what the pointy thing is on the pavement?
[ATTACH] Hi Ian
I think I might be getting somewhere ☺
That looks an odd arrangement.
I would suggest acropol for a diy job.
Kick the second row and see if it moves up the roof, if it does it will...
I thought superstar was asking if he could paint the lead below his window cill.
Wire brush & bitumen paint.
That work you have had done there is poor in every way.
As already pointed out by datarebal
Obviously not one with much pride then.
You didn't find them with an 0800 number did you?
It would be insisted on by the bco.
Was all this done by the same person?
Without a picture its not easy to visualise.
Sounds like you have access why not replace the gutter?
The work is poor and badly thought out.
Have the barge boards been been replaced?
Unfortunately I can't see your images, it says something about unsecure site. If he didn't know the slates would be nailed to the barge board then...
Ahh I think that's my problem I'm using a lap top!
Is that an DIY not app. your using on your phone?
The wind did it! well fancy that on the edge of a roof!
Don't get the same moron back.
You seem to have got the knack of uploading photo's from your phone. How do you do it ?
I would cut the kingspan in half making them 8'x 2' and stud accordingly laying the osb. on its side. If you think the wall might get wet then lay...
Possibly some sort of air raid reinforcement.
Sometimes the rubber inverts itself and then it starts holding water, if you can get something long and slim you maybe able to gently push it back up.
Separate names with a comma.