Those tiles will be cold on the feet. I'd go for screed and include wet underfloor heating. A single zone kit which can just be run from the...
Does the decking not need to be connected to the house for this 300mm rule to apply?
Also what depth would it leave in front to the pavement?
Yes it would.
Sorry to open an old thread. What's the colour of this cladding?
Also did you give an ventilation top and bottom, if so how did you detail it?
How was you planning to fill the gap?
I would have liked to see some ties in place if they are building an inner leaf just to give it some strength.
The top parts are being cladded to match the rest of the house/estate as per my planning permission. I've already got most of the materials needed...
The area of the timeber part will be approx 1800mm wide and 700mm high, at a 22 deg angle. It's not supporting the build it's simply an infill....
I'm in the process of building a lean to porch and up to wall plate level. The side infield are going to be timber framed then cladded. 1 side is...
Are you sure it's not AIB? The fact it has the broken section would say its the more fragile AIB.
Wait until they go on holiday. Get the foundations dug and filled. Job done.
Failing that cant you pursume your foundations are going no lower...
Any updates in this 1?
It looks almost as wide as the house? Did you think depth with regards to the 50%?
Are you planning to cut a chase for lead into the neighbours house? How's that work I'm looking at something similar.
I'd be surprised if you fitted a beam and there are no gaps even 0.5mm at some point? How did you even get such a straight line in the brickwork?
Green house glass support?
Think the first would depend if the installer is fensa or not.
If the original design which you said you submitted to building regs, showed no posts, and the builder is following those plans, does it really...
Separate names with a comma.