Search results

hi I am doing my house up & have cracks all over the rolled part of the ceiling and am wondering what’s the best way of repairing them also I have just had a re-wire & the walls need bonding but the ceiling sticks out from the wall & is there an easy way of sorting this, I have attached images...

Hi thanks for all your answers as there really helpful & the machine didn’t come with a viscosity cup cheers

Hi had some pre painted wooden skirts fitted which had been nailed in also the colour is more of an off white so I’m going to fill the nail holes & as I’m doing the house up I’ve bought a Wagner 150 paint sprayer & was thinking of spraying them. What’s the best paint to use to get a good finish...

Hi I have what I think are 1950’s tiles which I think are asbestos which I’m going to remove myself as it’s an unlicensed job but was wondering is there a chemical I can get to remove the bitumen like adhesive, any help is really appreciated cheers.

I was going to keep it the same unless you have any good ideas.

hi just moved into a new home & the fence at the side of the house has seen better days, it has 4x2 horizontal lengths top & bottom with 4 x 1/2 vertical slats running the length of the fence that attach to old concrete posts with coach bolts but we’re the 4 x2 attaches to the next length they...

Hi as far as I know nothing I only have four pir.

hi I’ve noticed when I’ve been coming home from work & when going to input my code into my remote panel by the front door after I’ve put my code in i have noticed zone 7 is flashing so I have to press reset to get rid of this. I have renewed the battery in the G3 panel in the loft on the advice...

Hi on reconnecting battery & with no power siren came on in bell box put mains back on & couldn't reset anything so had to disconnect battery,power down & wait for it to go off. In my manual it mentions putting a link in the G3 mini to reset the panel.

Hi pars tried that & alarm still going off

hi I have a ade accenta + remote keypad with a G3 box in the loft it all started with powering down fuse board to fit new outside light & the alarm went off & had to enter factory reset code to turn off. Anyway came in from work tonight & had a bright idea to try & put my usual code in which I...

hi was just wondering what type of glue I should use to stick a vapour barrier to a worktop under the dishwasher?

Hi kirkgas iam due to do my acs reassesment and wondered if you had a mock paper as iam reading the books but dont feel confident as nothing is sinking in ,i would really appreciate it if you could email me [email protected]

Hi iam building a concrete shed base for a concrete shed which will be assembled on site when my base is ready but iam not sure how much crush and run i will need for a base of 11 feet x 12 feet at a depth of 5 inches any help would be appreciated

Hi is there any chance you could give me a bell tomorrow just to give us a bit of advice obviously it would be in the upmost confidence,my name is Paul and my number is 07817957085 cheers m8.

Have had a problem with one of these going off on F05 previous engineer has fitted a pump and it went off i got the job and noticed the system pressure was low and the vessel had lost its charge so repressurised vessel and refilled system,it had been converted to a sealed system.I also checked...

Hi Kirk any chance of sending me that powerpoint to [email protected] many thanks

Wotan thanks a million i really appreciate your help :D

i have a k reg ford escort 1300l and the problem is lately the fan belt has been squealing so i changed it but after a while it started again then the next thing to go wrong the battery light came on then this caused a fuse to blow which affects the brightness of the main headlights it has also...