Search results

  1. vernerbongo2

    Oleo mac Strimmer problem

    Thanks John I can't understand why it started giving me this bother at under a year old & had only been use a dozen times or less. Is this normal? As I said earlier my marunaka has had almost zero problems & I also had a nikkari with a kawasaki engine for 6 or 7 years, no problems...
  2. vernerbongo2

    Oleo mac Strimmer problem

    Not sure if this topic is even covered here? I have an oleo mac 27cc Strimmer. From engine idle to acceleration/cutting the engine cuts out. Also hard to start. When I adjust the high & low carburettor adjustment screws everything works fine for a few weeks then it does the same thing again...
  3. vernerbongo2

    Neff S5453X1GB/55 dishwasher

    Neff dishwasher panel has no lights, I tested the power and it's getting to the on/off switch. I'm not 100% how to test the switch as there are 6 terminals but I do know the following. Thick brown is live Thick blue neutral both reading 240volt Grey/black striped & white cables go live when I...
  4. vernerbongo2

    Neff oven cavity rust holes

    Hi guys I went to replace my neff oven heating element and behind the fan cover there are rust holes along the top and bottom edge of the indentation (cover fits flush over) I filled these holes with a flexible fire cement type product yesterday. There was a gap between the metal cavity and the...
  5. vernerbongo2

    Wiring vortice fan

    Thanks EFL I think this will do the trick, I'm replacing an in-line fan in the attic which has a PL, SL, N. The instructions weren't just as clear as yours. Much appreciated :)
  6. vernerbongo2

    Wiring vortice fan

    There are several diagrams with several configurations. This diagram is for a set up with a timer and high speed.
  7. vernerbongo2

    Wiring vortice fan

    Yes I get that but where exactly do I put the link wire? Am I right in saying I just put a link in between 4 and L2? Thanks for the reply
  8. vernerbongo2

    Wiring vortice fan

    Slightly confused with this bathroom extractor fan wiring diagram, can someone please explain it in layman's terms? Much appreciated.
  9. vernerbongo2

    Adding a dimmer switch to a light with 4 way switching

    Apologies to anyone who couldn't pick up on what I was asking or ment. Ban-all-sheds forgot to mention it is the downstairs hallway a switch at each door. Yes I understand and my brother understands one dimmer would set the light level. Thanks for all the input and banter :)
  10. vernerbongo2

    Adding a dimmer switch to a light with 4 way switching

    All this chat about slaves, I just want one dimmer switch. Can I just swap out a 2 gang switch with grid switches then, without slaves etc? I also ike the idea of a dimmer and false dimmer.
  11. vernerbongo2

    Adding a dimmer switch to a light with 4 way switching

    His guys, I'm not an electrician by the way. Was for putting a dimmer switch on my brothers downstairs light that can be operated from any of 4 wall switches. Problem I have is I've found out on google I need to add the dimmer to one of the 2 way switches but they are 2 gang. (I have x2 2 gang...
  12. vernerbongo2

    g3 panel, progamming group choice etc puzzling

    Just recently discovered I can have individual group control on any group if I use a programmed pin number instead of a fob but if using a fob I must include group 2 for the fob to work (set/unset). Eg group 1&2 or 4&2 I'm thinking could it be because group 2 has an ordinary keypad without a...
  13. vernerbongo2

    Ridge tile access on a hip roof

    Thanks I'll get someone to do it and also look at the other suggestions you've made. :)
  14. vernerbongo2

    Ridge tile access on a hip roof

    Alright lads/ladettes Ridge tiles are randomly coming off our hipped roof in windy conditions due to rusty screws that are 30+ years old. My da wants the blown off tile fixed but I want them all rescrewed. What's the easiest way to do this, the ground around the house is at different levels...
  15. vernerbongo2

    what make/model is this door intercom?

    Those are no good sparkymarka, I have a set and tried them, the comelit screws are a unique fitment. Comelit gave me a part number and I've emailed a few comelit suppliers, so far I've had no success. part number is: 2C61000010 I'll keep trying.
  16. vernerbongo2

    what make/model is this door intercom?

    Anyone got a spare panel security screw key kicking around? Just discovered the screws aren't ordinary security torx screws :confused: Might not get them out anyway die-cast panel fairly corroded?
  17. vernerbongo2

    what make/model is this door intercom?

    Brilliant lads especially the programming info sparkymarka ;)
  18. vernerbongo2

    what make/model is this door intercom?

    Hi guys, I need to change the access pin number on this door intercom but I don't know what make it is and I don't know how to change the pin. any ideas? thanks
  19. vernerbongo2

    g3 panel, progamming group choice etc puzzling

    sorry since discovered its a galaxy 48 (g3) programming menu differs from g2 in menu option 63. Told you it was hard to explain! I'll try and get more info. In short when programming users fobs, if I give each fob holder group choice of group 1,2 & 4 all groups can be set/unset together or...
Top