Search results

https://www.quick-step.co.uk/en-gb/hardwood/accessories/hardwood-profiles

Yes right angle. they were but small bullnoses. is your laminate quickstep as they do a good system for a bullnose

That’s a solid oak trim I used on this one.

https://quantumprofilesystems.com/en/brands/quantum/designproduct/qr-sb136r-ramp-back-stair-nosing/ https://quantumprofilesystems.com/en/brands/quantum/designproduct/zb136r-z-range/ that pic is on LVT. Did it with Laminate as well with plywood under nosing to lift it and leave expansion for...

Quantum nosing can be used.

Good luck mate

Shocking fitting that. The whole floor that size should be fully glued down. Better to cut the vinyl 1-2mm short then a clear silicone the perimeter. It’s nearly impossible to pattern match the colours in herringbone. Last time I did one I did the joint zig zag so you couldn’t see the joint.

Where you getting 15mm plywood from ?

Sort of yeah. but they have to use the correct liquid Dpm.

Polysafe hydro

On the floor we always screed the floor at 3-5mm with ardex NA , then DPM1c up the wall a inch , then another coat of NA or ardex CL and keep that away from the bricks about a inch. Worked well for us over the years.

I think he means a screeding compound. some people call a self leveller. Smoothing compound. What it could need is some ardex DPM1c moisture suppressant as well.

would be a different batch so could look darker. or maybe go with a tile effect amtico

https://stairnosingsuk.co.uk/products/upvc-stair-nosing-wood-effect-for-angled-stairs that would work mate

Yes no smell. Like I said sometimes when out of date it smells or bags / bottles have been frozen Maybe.

Ardex CL. All we use is ardex & uzin. When using a water mix you never go over the water limit as it’s makes the top surface weak and soft.

Mixed with too much water that. Should be more grey. Tap it to see if it sounds hollow. What floor covering is going down?

So shouldn’t be any damp then? The smoothing compound he’s used is a water mix not a latex type. Sometimes if the latex is out of day it can smell. is it grey or white colour ? Can you post a pic. if lots of cracks yes take it up. Should be easy if he hasn’t primed it ?

Have you got vents for under the floorboards at front , side and back if the house ? If so are they clear.

What was the sub floor ? How old is the sub floor ?