Put a new filling loop on and charge vessel wolesley part no 440442 it's called a disconnector
I have registered boilers with Worcester as old as 8 years so I suggest you give them another call
Blocked plate forces heat down flow pipe
Does the temp display rise rapidly to 80c plus?
What colour was then replacement vessel?
They are meant to split, when tightening you will feel them crack and go slightly loose, that's normal tighten them back up and your good.
I have seen a 180 turn and pull out one, didn't know they existed until it came off in frustration!
Bravo for holding your hands up, most here would bullshit their way out of it, we can't know everything
. Sick to death of know it all's on here...
The service valve unscrew itself from where you have the arrow when you overtighten the connection to fill valve,
Leave trvs open in summer and every now and then turn off and on.
The trvs he's fit are bi directional so can be fit on flow or return
The plumb center trade fix are myson contract body's. The plumb center heads look better. I believe they are made by myson. I like them and fit...
Good to hear it's Working. Its always nice to get an update
If you have an ideal response chances are it won't last long, not seen one for years, they became obsolete very quickly.
A decent cycle pump with...
My BIL has done just that at a total cost of approx 3k
They was a good boiler worth repairing, recently the spares prices have shot up rendering a lot of repairs BER unfortunately
That's not the boiler he is talking about, that is an instant
The rear most on top is not a CH micro switch, it proves the pump is running and has to prove on HW and CH
Jam a driver in to prise it open
Don't link together just cap each end individually
Separate names with a comma.