It will normally be a loose/faulty transformer.
Another way to do it so the cameras are lower is to run the cable behind the drainage down pipes to your preferred level.
The cable still has to...
You will definitely need the eng code if the panel is locked.
You will need to default the codes(if the panel is not locked).
Yes as above always use quality copper cable.
What type of router do you have?
Have you tried www.aliendvr.com for help as theres loads of info on there.
Click on the British flag on the homepage and this will take you to a...
I really like the Orisec equipment as it’s good to install and easy to use for the customer.
App is really good. Had a faulty panel(touchscreen)...
Yep...... it will probably be the external bell tamper switch which is faulty or needs adjusting.
Iv heard loads of faulty tamper switches on...
So you had an existing bell wired so why not install a wired bell if cable is there from bell to panel?
Your remote has not bee programmed right....
You will be ok as you have extended the ring main and spur of a socket.
If your not sure get a spark in and he will provide all the info. Or just...
I thought Orisec only sell and deal with trade?
Sounds like you are a diy install?
Ah just read your last sentence.... is your sparky providing...
Have you just added another double socket on the existing?
If so then(up here it is) ok to install a unstitched fused spur by the front door for...
That is a Gardtec CP8 or CPX panel.
Remember both can be locked if you don’t have the engineers code.
If wireless devices are being used it’s a CPX.
Have you tried what I said with the new battery? Power down then up and reset?
Turn off the system fuse out/battery off
Then fuse on battery on.
Reset system and see if the fault shows.
When was the battery last changed?
If you have a meter check the voltage at the pir.
You could have a break in the cable so I would check continuity of the cable.
I would phone the installer as you need the app password to connect.
Just take the speaker off and snip the wire.
To totally disable the system you will need ladders as there is a back up battery in the bell....
Separate names with a comma.