Raised off the ground, and covered with a sheet of corrugated iron/box profile.
So is it just sand and aggregate coming out?
You might be able to give it away on gumtree etc, collection only
Keep an eye on gumtree etc, round here you often see them in the farm auctions (which are probably a bit thin on the ground in london!). Hang...
The only right answer would be phoning round a couple of local hiab companies and asking.
According to google maps it's 42 miles so my guess would...
From past experience, it'll be the lines stopping it, you sort of have to shoogle them round a bit where they're tight.
To be honest for rainwater you can get away with a lot. A bolt through the hole with a rubber washer. Or a scrap of plastic bigger than the hole...
I think this is the best idea:
Sleepers all around will add a fair bit of weight
What about adjustable hinges? Then you can fine tune them to exactly how you want
It'll be fine with screws.
Coach bolts if you want to be fancy!
Half a sheet of ply and a tin of gloss paint :censored:
Is this for storage?
It's not something I bother with, just turn off the fuel tap if there is one.
If the machine won't start when you come back...
After a while you'll probably forget it's there!
If it was me I'd paint it a different colour, make a feature out of it
Don't bother with "chainsaw" gloves, they don't really offer you any extra protection on a modern saw with chainbrake/hand guard.
Put the money...
Yes, assuming you mean scalpings/mot type 1/2 etc.
And the surface is quite clean, no point putting good stone over mud
You could probably make something up from some multi fix metal banding, if that's what you're after...
Post up some photos, maybe you can make some little timber "hangers" for normal gutter clips using some scraps of 3x2 or whatever, or fit a fascia...
The problem there is so much stuff coming from the far east that completely lies about lumens, and even more annoying, will lie about wattage too!...
Is it not easiest to just have the post square with the house? Deal with the angle in the hinges?
What about recycled (repurposed) plastic of some description? Have a look round skips, industrial units, building sites. A decent diameter pipe...
Separate names with a comma.