The sketch was from a Manufacturer's Instructions, it seems there is a genetic sketch which all manufactures use
Comments blocked ( not by DIYnot )
Is there a clear 600 mm distance between the end of the flue and the nearest piece of roofing.
Not picking holes but this thread is almost 8 years old.
Or have a vented hot water cylinder and avoid the cost and hassle of the annual safety check. ( Boiler still has to be serviced )
Having "some knowledge" can be worse then having no knowledge. Find a heating engineer to diagnose the problem.
This article is about the Ewan Paton who appeared for the claimants http://www.guildhallchambers.co.uk/news/2271/
Mr Paton might be prepared to...
Yes, there is a small chance. Happened to a local garage a couple of years ago, tanker driver connected delivery hose to the wrong valve on his...
You may have to have new larger diameter gas pipe from meter to boiler to ensure the boiler has enough gas. Often this has to be run along the...
Hot water is not scheduled in a combi, the combi fires up when ever it detects water flowing through the boiler on it's way to a hot water tap or...
To me that sounds like either the pump that circulates the water is not working or valves controlling which zones are to be heated are not opening,
even then filling a bath from a combi can take a long time, and all the time the water already in the bath is cooling down.
If there isn't one then a fault in the fan could leave you in the dark ( RCD or MCB tripped ) until an electrician can come and isolate the fan...
We had Ciara and Dennis. What happen to storms E F G H and I ?
Looks like the Spanish are doing their own thing, as they have done for many years,
Yes, a new build bodge, it cannot vent if it has a water filled U bend.
Invoke the warranty and get the builder ( or a better one ) back to...
in the hospital environment many power sources are protected by 10 mA RCD when they are supplying equipment that connects to the body.
Yes that looks OK.
Separate names with a comma.