Pump needs a live for overrun which in that diagram is controlled by the boiler PL.
End feed is slimmer :)
On some of my jobs it's about 5 mins :LOL:
One wonders what's the access like for flueing on the other side of the wall?
IMO you'd be better off getting an engineer in. Builder's often leave issues with a system when they tinker with plumbing (which they usually do...
Your gas safe fitter will know how to make the installation comply.
Bette trays are top end too.
Stone resin is what you want.
Pumps fail. Simple as that. More crud in the system, more likely they are to fail prematurely.
You can get a tanking tape that goes over the board joints. What boards have you used? They sell a tape in wickes. But I don't usually bother. I...
Angry pixies (electricity) doesn't care what colour the insulation is :)
I used to have 2 showers connected off one pump and it worked fine... Even OK when both running. As above just T off the pump outlet pipes and...
How many times have we heard that one... "it worked before you came!" :cautious:
Nope. Not for the assembly parts of the trap... Trap to basin depending on washers supplied, then yes... Mait for me at that juncture ;)
Don't slather it on though else the gaskets'll go a shlippin and a shlidin as you tighten down.
This little tin'll do you......
"Want doesn't get" as I tell my kids :D
If you mean as @Madrab above then new seals and/or light smear of silicone grease on them.
OK, and the vehicles travelling to them replaced by countless delivery vehicles from online shops I suppose.
Separate names with a comma.