Search results

I had the ikea one before and it gets scrumpled under the rug and loses the grip.

Thanks, can you share a link of what kind is it? That sounds promising

Hi folks, Can someone advise what's the best thing to use under a rug to avoid it slipping? The rug is going on a titled floor.. I have used all sorts off anti slips mats from B&Q and IKEA but they are all useless.. Please can you advise what works best in your experience

I used the compression stop end and M14 diamond hole cutter on the grinder to cut the tiles neatly.. thank you all for the advice

Thanks for input folks.. I have used the poly disc on the angle grinder to remove the grout off the tiles.. 20 mins and 19m2 tiles are now clean.. thank the lord !! Got myself some grout remover solution and scouring pads to smooth out the grout lines now.. panic over !!!

I'm wondering whether this will help remove the grout from the tiles.. Has anyone used this on porcelain tiles? It says it doesn't scratch the surface As the grout dried quickly I couldn't wipe it with the sponge and I now have around 0.5mm streaks of grout along the lines.. (haze is when...

Thanks.. I will check.. I'm reluctant to use any chemicals as I don't want the grout to be weakened.. unless I'm being paranoid and someone tells me otherwise

It's not the haze actually, it's a thin layer of grout around the lines.. just wondering if an orbital sander with a scouring pad will speed things up?

Hi folks, Made a school boy error and left the grout on too long before sponging it (yes I'm cursing myself too).. what is the easiest way to clean the grout from the tiles? I have used wet scouring pads and it's pure taking ages.. I don't want to use any chemicals which would result in the...

Wago connectors are the way to go and various option to meet the design

You have the decoupling membrane so you are good.. however I would still recommend you to get S1 adhesive.. something like Mapei Keraflex S1 or Keraquick.. as it's flexible and works with UFH. (think TileGiant do it) for grout you can color match the ones from Mapei Ultracolor plus... I have...

Fab... wish me luck.. lol

I have had few tiles comes loose in the upstairs bathroom (6 year old.. no bounce on the floor so only thing I can think of is that it was not applied correctly).. I want to prepare the floor to reapply adhesive and wanted to check what's the best and easiest way to remove the old adhesive? I...

No, the probe is fitted to the edge in between the two wires..chasing the floor boards would weaken it resulting in movement which is not good for tiling.. I'm trying to workout: 1) if anyone else was in the same position and what did they do? 2) the odds of probe failing so I can install it...

It's the old tongue and grove wooden floor with 6mm No More Ply boards on which the UFH mat will go.. I am not using the insulation boards because: It would raise the floor by the time it's tiled and result in a step at the door The No More Ply boards are insulative too So I can chase the 6mm...

Any thoughts folks? I could install it without the conduit but fear if the probe goes faulty.. its game over.. What are the odds of the probe going faulty? Has anyone changed the probe? How easy/hard it is when it's in the conduit?

Hi all, Have laid the Premium Pro brand UFH in the living room which will be tiled over.. just can't work out how I install the conduit for the temperature probe as it's around 18mm. I have seen videos where they chase the insulation board but feel it would still sit proud. I have the old...

Muwhahahaha won't be that lucky :LOL:

I agree... don't personally like silk for the reasons you mentioned above.. its just that the Mrs has been going on about silk.. I'm convinced that Matt would look nicer.. any brands you would recommend? I can get from Stax round the corner..

Hi folks, Know the differences between the two but just wanted everyone's opinion about which ones are durable as I'm painting the hall and it's going be high traffic.