No need for a pilot hole with thermolite being soft.
Try some longer 102mm and angle them slightly down or use some of those long grey sleive...
Timber studding and insulation hopefully.
If its not rotten and its stable why not, obviously you will need to trim doors.
I would use one of those brackets, a 5mm drill bit to brill into the mortar so you can slide it in then with a steel drill bit drill through the...
It looks like an ashfelt floor to me, but not easy to tell as I can't see the whole area. I would leave it alone unless absolutely necessary.
The insulation needs to go on the inside of the bathroom and then finished with foil back plasterboard and skimmed. Anything else is futile in my...
Air flow under the structure is important for timber.
Decking screws! that's were I have seen them before.
Keseryn yes mine are r1 r2 as well.
There is a large tool outlet in Preston called William...
I have just bought a new Bosch 125mm cordless grinder and it has the new X lock blade system, it takes seconds with no tools needed to change the...
Can you not bend them over several days with weights or clamps before you intend to use them.
Ok this is how I do it, I have built several timber outbuildings over the years.
Build the floor frame to the size of the building you require....
Are you living in the roof space?
Ahh I didn't know they had made a new version on the mendip so it makes sense to use those.
So it was a hip roof originally?
Its a free payment made to the self employed based on your last 3yrs tax returns. not means tested.
The ladders I use are rated at 150kg
But if you are putting the ladder so far back because there is a wall there to stop you slipping, which in...
I would try making it all one level.
I would use the smooth regent with the largest headlap possible.
Ok enjoy the honeymoon period!
I have a few in my bahco multi bit set but I have yet to need them.
Separate names with a comma.