It is daft that they haven't put a compression coupling straight off the top of the boiler anyway. Two compression couplings and a bit of pipe...
That's just how they are, mine are the same. You can't seem to be able to buy a decent set of Benders anymore. I've had issues with the bolts that...
Hi, you could just use the heating side of the control. It's a hard to answer question as it depends on which boiler you have and what controls...
Does the pump have power to it? Could they have pressed the switch by accident?
The wiring guide is in the instructions
You can’t circulate water down a pipe if there is nowhere for it to go. The Rads are the link between the flow and return.
Get a heating engineer to come round and diagnose or for you.
It's it external on the pipework or is it incorporated in the boiler? If it's external then they won't entertain it and will probably charge for...
If you remove the rads, it won't circulate around the pipework.
I wouldn't think twice about using x400
How have they powered the valves with a comfort 2?
Try giving their tech help a call, they have been brilliant for me in the past.
Could be the control or it could be the pcb not modulating the...
You need to get someone else out. Apologies for being vague.
As far as I was aware, under gassing a premixed burner isn't ok. If you drop the working pressure at a worcester to below 14mbar, the CO goes off...
I've no idea what you mean but trace heating might be your solution.
Is it a deep humming / vibrating noise? If it is, it could be the heat exchanger. The 360 heat exchangers are known for this.
It could be alsorts on these. Seals, blockages... the list goes on
It could be blocked where the old cold feed comes off the domestic circ. Is the auto airvent working? As it might be blocked.
There are that many radiator brands out there that unless it's Stelrad or Myson, it's hard to tell.I always think the heavier the radiator, the...
Separate names with a comma.