I watched videos, then thought I'd treat myself to someone else doing it.
I bought Mazda pump and rocker gasket, which lessen the odds of...
Complety forgot this post!
I didn't change the calipers, so didn't need to adjust the handbrake.
The car passed the MOT, :)
I put it in the...
Ok, it looks like it's ready for a test then!
I didn't change the calipers, because the old ones look of and the pads look almost new, also...
Hi M and J,
I am talking about the Strut rubber boot protector.
If we assume that it passes the MOT. I can see other perished rubber around. Do...
Will a car fail the MOT, if the Spring/shock absorber rubber boots have perished, otherwise they look ok. I suppose the rain will soon ruin...
I measured the end of the Steering rack and it was 6MM larger than the gaiter, so the ones I bought definitely need warming.
I understand what you're saying. As they were still pretty warm after the hot air gun, they yielded to the cable tie, and the molding went...
Trolley jack! Oh how the other half live! A pile of bricks and a plank held the Tie rod end, which is now tight.
I think the Boots are...
I'm replacing the Steering boots and the tie rod ends oin my Mazda MX5 NA 1993 Eunos.
1/ The large end of the Boot was too tight to fit, so I...
Shame it was a **** moment, but following what you say:
I once was searching for a fault in a motor control PCB. At night with the lights...
I removed the cover after jacking up the car, so some of the dent is showing, but I didn't notice it. I don't think it's affecting...
The other photo is from the front on with a yellow ruler.
I've just bought it, never on the road.
My guess, is that it doesn't affect...
I think it's more than that!
If you look at the picture with an arrow on it, you can see the hole behind the point is angled. This is one...
I took the lower engine cover off my MX5 NA MK1 1993 to replace the Steering boots, and saw a dent in the Chassis.
There is a scrape on the...
[ Back in 1/2 sec ] Remind me not to face you in a gun fight:)
Ok, I'll give it a go. ( I see now why I've had to bang away all day in the past:) )
Do you use heat or WD40?
Ok, bite the bullet and buy.
Ok, thanks, C.
I'm changing the discs on my car, and wondered when is the time to change the calipers. They're working fine, with no leaks.
Are there kits...
Separate names with a comma.