Search results

  1. Bigsosij

    Pyronix Paragon Super - No Supply

    Where do the rest of the brown cables go
  2. Bigsosij

    Euro46 / Electrician cut the keypad and pir cable

    Disconnect the tag reader and see if the keypad works
  3. Bigsosij

    Euro46 / Electrician cut the keypad and pir cable

    U got owt else connected to the 485?
  4. Bigsosij

    Euro46 / Electrician cut the keypad and pir cable

    My moneys on the cable
  5. Bigsosij

    Euro46 / Electrician cut the keypad and pir cable

    U say reconnected.... has the cable been replaced or joined? U will need to test the cable with a multimeter or test the keypad at the panel on a short cable to prove where the fault is. No point guessing
  6. Bigsosij

    Texecom Veritas R8 issues

    Whats the verdict
  7. Bigsosij

    Texecom Veritas alarm

    Ill be back
  8. Bigsosij

    Texecom Veritas alarm

    Has the tanper fault cleared then....
  9. Bigsosij

    Texecom Veritas R8 issues

    U tried 4321
  10. Bigsosij

    Texecom Veritas R8 issues

    U tried linking out zone 1 in the panel to see if it clears then type in user code which may have defaulted when all zones are clear
  11. Bigsosij

    Texecom Veritas R8 issues

    Try powering up mains only if u havent already
  12. Bigsosij

    Texecom Veritas R8 issues

    Is there a battery connected? If so what is the charging voltage
  13. Bigsosij

    Texecom Veritas alarm

    U didnt mention a tamper fault when you posted originally did you change something?
  14. Bigsosij

    Texecom Veritas alarm

    Did u say the tamper fault clears if u link bell tamper out on panel?
  15. Bigsosij

    Texecom Veritas alarm

    Looks like u need a new bell then
  16. Bigsosij

    Texecom Veritas alarm

    Did you connect the +ve and -ve up the wrong way round at any point with the A and D terminals being opposite on the accenta and the veritas?
  17. Bigsosij

    Texecom Veritas alarm

    Are you certain on the wiring at the bell box if you have not touched it? Have you looked inside
  18. Bigsosij

    Texecom Veritas alarm

    Did u try bell/strobe tests? Also the strobe will flash if the tamper switch on the bell is open so check if its doing that (assuming its a deltabell)
  19. Bigsosij

    Texecom Veritas alarm

    Probably need to adjust the tamper switch in the bell, did u fit the screw for the rear tamper?
  20. Bigsosij

    Texecom Veritas alarm

    You can in misc options 2. Is the bell ringing just for a few secondswhen setting or longer? If u do bell/strobe tests from keypad u will be able to ascertain if you have got then the right way round or if there is anything more sinister going on
Top