Search results

I’m extending my drive into the lawn and have been keying in to the old block paving in a herringbone pattern. I’m having trouble to getting it all square. No matter what end I start at the other end finish’s up with rectangles smaller than 200x100 blocks. What on earth am I doing wrong? I can...

Could I ask some advice on laying 600x600x20mm porcelain slabs please. I have a slabbed patio as picture laid on a block and beam raised structure. What the best/easiest way to lay the new tiles? Is there any way of over laying the excising slabs? Could I pour a screed and lay new ones with...

Little update. Just walked past the keypad and thought to myself I’ll have a little guessing game. Turns out I guessed the engineer code 1st attempt. Good old national memorable dates. Haha. Anyway. Just a thanks to everyone now I have the engineer code I’ve omitted the upstairs for part arm...

This button on the panel? Edit. Just read the manual. I’ll give this a try. Thank you.

I’ll do the above again and report back what event log says. I’ve been in touch with a company. They’ve quoted me £89 for the first 30 minutes £15 per 15 minutes there after. Plus any parts, saying may need a new battery?? Does this sound reasonable? I’m at the point now where I really want...

I’ve tried that and it does stop the chime, thank you. Next issues I’ve found is it looks like part arm is programmed to arm all. I’ll have to test in the morning. I get the same message for part arm as I do usual arming. Area in exit A. I was told A is for all.

Here’s what I’m getting after code and 2.

Thanks for your help I really appreciate it. It looks I possibly don’t have the engineer code as I thought i did. I’ve been using my arm/disarm code as that took me to many menus. When I use it and press 2 it takes me to part arm system. I’ve tried 1234 and that doesn’t do anything. Looks like...

Here’s my user panel, and bedtime 1 is what I’d like on silent arm.

Step 1 lol. So I put my code in and get loads of options but not one that says Area. Unless I’m not in engineer mode but I do have an option saying enable engineer so presume I’m in the right menu?

Yes.

Unfortunately he couldn’t. Not local to Leeds are you? Or have a link to a dummies step by step guide?

I gave it a go but have no idea what I’m doing. I did have my installer back but he couldn’t figure it out either. Anyone in the Leeds area fancy a call out?

Brilliant thank you I’ll give that a go and report back.

I don’t access to Wintex, not massively computer savvy so I wouldn’t know how to connect it all up tbh. Is this something I can do from the user panel menus?

Hello. When I part set (evening arm) I’m still getting the chime count down which is waking the kids up at night time. Would anyone be able to guide me through setting it to silent arm please? Thank you.

Just coming back to this. I need to raise the area by 2 brick courses. This will be above DPC to reduce the step out the bifold doors. My plan is: -Fit channel drains along house perimeter. -Pour concrete slab 125mm thick straight onto exciting patio. -Tile direct onto slab using outdoor tile...

3 core. Slight rust, more white oxidisation tbh. Want to run it to a shed. It’s been used before, pulled up and then sat in storage for 2 years. I know the best think to do is to replace it but cost these days are just crazy.

Hi All. I’ve got 20m of 10mm SWA I’m wanting to use but I’ve noticed the outer earring strands and corroding. I’ve cut back a meter and it’s the same. Is it still useable? Thanks.

I’ve got a raised balcony patio area on block and beam. It’s currently slabbed but they are lose and I’d like to lay porcelain tiles in their place. Any advise on making the block and beam water tight prior to laying the tiles. I’d like to use the area underneath for storage but it currently...