Search results

Thanks for the advice ianmcd

Thanks Elkato531, i thought about that but was concerned about the risk of buy cheap, buy twice. Will look about tomorrow though. thanks again

evening all, Does anyone know if an Aqualisa 901506 Harmony shower head will work, as a replacement, on an Aqualisa Aquavalve 700 with unvented cylinder system. Many thanks in advance. Mutley56

Thanks Hugh. Thanks everyone for your help.

Yes that’s the intention thanks.

I just thought I’d post a picture of the finished DIY job. The hose piping is to drain water butts. thanks all for the advice. mutley56

Got it. Thanks Chris

Chris, forgive me, do you mean follow the shape of the cracks or cover the entire surface of the pipe?

CBW, Is that a matter of forcing some mortar into the cracks? mutley56

Hi HB, I now understand that this is a gulley. Water drains from the sink easily and the level in the gulley doesn’t change, and so I don’t think there’s a blockage. thanks for comment though. mutley56

Mr Chibs, it was indeed 40mm pipe, thank you. I did the job this afternoon as needed the kitchen sink up and running again. I will address the back fill with mortar tomorrow if it stops raining. mutley56

Dear all, can these 2 ovens be switched around so that the top oven is below the bottom one? Elderly relative is struggling to safely reach into the top one and only uses this one. thanks in advance for your advice. mutley56

just to confirm, What size pipe do I need for the extension? Solvent welded? thanks. Mutley56

Thanks Dereekoo. I have a tub of blue circle ready mixed mortar powder I can use. mutley56

Thanks Nige F. That‘s great advice. I was really overthinking things. thanks again.

Dear all, I need to repair this, which drains the water from the kitchen sink and dishwasher. The horizontal section of pipe ? clay ? seems to be too short to deliver the water into the drain and there is a void underneath it. I think I need to remove the horizontal clay section and replace it...

Thanks Madrab

Hi Madrab, what degreaser would you recommend please? thanks.

tnx Terryplumb. No self cutting involved. Valve is compression fitting. I will ask our friendly plumber to replace the valve. disappointed in Peglar if it is the valve as I asked for a Peglar valve as this brand was recommended on here. Maybe a rogue valve

Do you think it’s worth me putting a wet / dry vac on the outdoor pipe work with the tap taken off the wall?