Great, Very helpful. Thanks.
Once I know the zones they are on, do you know what programming commands to use?
Aaah. This is what I need to find out.
Yes i have done that already. As you said above, I still need to make the Hall PIR as timed exit and the door swtich to not used.
Any tips for the programming side of things? Not too ofay with programming the 9752
Thanks. Can I remove the redundant wire to the alarm control unit?
I'm pretty sure I have set the level A to timed exit. Yes, there is a PIR in...
I am removing my internal porch door, which has a ten pence sized contact in the door and a contact in the door frame which has a wire going...
So I haven't put the covers back on correctly?
I am having problems exiting 'installer mode' on my Scantronic 9752 (9940 keypad). Basically a battery went low on two of my shock sensors...
First question in floorings :D
I have a soild wood floor that is 20mm thick that sits on 1mm dpm and 3mm underlay. Can anyone advise on...
Is the bend rad for 2.5mm T & E 29mm?
Also, I am routing the above parrallel with a floor joist so i intend clipping to it, length will be...
Never had a trip yet. I too was suprised at the kitchen being on a 20A.
Forgot to mention. The washing machine is in the garage on another circuit.
Kitchen has usually a kettle plugged in, microwave and toaster,...
Sorry i understand what you mean now. Basically if the bedroom socket is the 2nd to last then I can spur from it or if it is a spur from a radial...
I do, however its the next door bedroom (our 2 year olds) and It has all been decorated and fitted with new carpets etc. i didnt think ahead, doh!
Just a question on spurs on radials. I currently have a radial circuit (20A CB and 2.5mm) that supplies kitchen sockets, 1 socket in the...
Ive got this bath filler (new one, just recently fitted) :-
The red and...
A while ago I did the following:-
Moved my downstairs bathroom light switch to the outside as it was inside the bathroom. I installed a...
Ok. Ill go round and fill the larger holes that i can find and leave the smaller ones.
Separate names with a comma.