Hi Aesmith thanks for being helpful and understanding the question! :D
The instructions were confusing as they jump to a section about...
So no-one on here knows which wires that go to the light connect to the L1 or L2 and COM?
That doesn't help.
I know common connects the supply to the light...but you're not telling me which wire goes into common and which into L1 and L2.
To put it...
Am fitting an inline relay on light circuit. The inline relay will be switched on and off by an RF PIR.
So, there are three supply cables....
Thanks for all your help guys, I assumed as much that it must be the toroidal (wirewound) that was causing the problem!
This is the old switch working fine:
This is the new dimmer switch I have:
Can anyone helpful advise which wires should go in the new...
I was just about to ask that! I should put the others in blocks :)
great, thanks for your help you two.
Thanks for everyone's help!
I'm only wondering where the SEC: 0-12V RED YELLOW and
0-12V BLACK GREY wires go.
Since there are four wires...
Just to add I'm only interested in helpful replies from genuine electricians. Thanks.
I have a toroidal transformer to be use for 12V track lighting.
The transformer has the primary blue and brown wires.
The four 12V wires are...
Thanks guys, these are the test results:
This is the report I got when the Consumer unit was installed. Does it have the ELI results?
Good stuff Rocky!
So should I get a sparky to replace the light circuits with 6A C type? I'm assuming not 32A C type.
But all only after...
Yep, they're toroidal transformers. I guess it's telling that the 100VA one doesn't trip.
What's a C6 breaker and who do you think it might help?
Separate names with a comma.