A plumber would most likely have as much idea of how to vent an oil pump as you.
Yes you have been trying to vent from the wrong place and would...
Think he probably means over aired.
100 feet 15mm plus fittings could probably run a Bunsen burner ok!
Any of the sheds. Your local plumbers merchant, or just buy another
drain cock of the same type and change over the guts of it.
The valve without a wheel on it is the one to turn off.
Use a spanner or adjustable to turn off.
Open a downstairs hot tap to empty the pipe...
Simple answer, if the olive not in the right place then ' it the valve with a nammer' to
put it in the right place.
The olive not in fixed place...
Same here. For the last three days have to log in every time.
Perhaps I have missed something. Why would the OP need to drain down the system to remove
the radiator with both valves closed?
Trap extension pieces are available for your situation in 1 & 2 inch lengths.
Most plumbers merchants would stock these.
Spot on oilboffin.
What about long standing members who are twats?
Oyster card costs money.
Agile must be on bus pass by now judging by his mug shot so should be cheaper.
(I am pushing 71 and he looks a lot...
That's no good!
The OP wanted a left turn elbow.
That is clearly a right turn elbow:rolleyes:
A vice would be a bit lumpy to lug around on a bus.
A decent pair of grips would do the same job.
I think you are saying that the boiler is ok on hot water alone but
overheating on heating alone call. (The comma appears to be in the wrong...
In that case you still may have a make up tank at a high point like in a high
Yours is a very ancient boiler that could be filled with a closed header tank.
Have a good look to see if there is no mains filling loop attached...
Don't use PTFE on the nipple, the threads don't make the seal. You would more likely
end up with leaks.
Separate names with a comma.