Do you think it could be caused by some dirt over time?
I assume I release the pipe by pushing the white clip in and then remove the pipe and then remove the clip?
Do you mean the silver nut, connecting the elbow to the TRV or the white clip?
Returned from holiday and discovered the pressure had dropped and a stain on the carpet on our small rad.
Amid pressure low, system still...
The extractor fan is for a hood in the kitchen, do you still recommend I check? I checked last night with a smoke pellet and saw the...
I have gaps in my ceiling, where the central heating pipes feed to the boiler.
When the extractor fan is on, we can feel the air coming...
The system is five years old.
For the pump I have the following:
The GC Number 41-591-87
I have a Potterton SL 15 with Kingspan TT210PT4 with a Grundfos UPS025-60 Pump set on Speed 3.
I will need some sort of mirror to take the reading as its on the other side.
However, from cold, I will ensure everything is off...
Thanks, never thought of cork.
How many mm this you use?
I've tried to take over the clear cover, but it does not come off.
I looked online as we have a Kingspan system and it mentions a...
My parents recently moved into a five year old house, where the ground floor is concrete with lino on top.
Now the ground floor area...
The flow and return are correct based on the pump.
There is no number on the valve, does not seems it can be turned.
Our radiators on the bottom floor are not getting hot, I've been having a look on the weekend and came across the bypass valve on my S Plan,...
I would probably install a three core flex cable to future proof the design. Does it affect any regs if I use flex core under the floor boards,...
We are getting my parents bathroom fitted and as we are having a shower installed, I would like to also install a shower pump. The only area...
We have recently moved into a home and the previous owner had two dogs. Looking at the garden they loved to dig and have left bald patches around...
I have most of my rads above the boiler, I also have an auto air vent in the airing cupboard which is at the highest point apart from the vessels....
We have a microbore system, I would like to have a filter installed as it helps maintain the system and its effectiveness.
I was looking at the...
Separate names with a comma.