So it's the same switch, just involves wiring the supply to the load and the loads as the supplies?
I can find changeover switches that switch between two supplies - say mains and a generator - to serve a single load, but none that use a single...
In the second pic, none of the wood seems to be in contact with the purlin - maybe that is just the light - and a plastic shim appears to have...
As the officer advised, and get tiles that match as closely as possible the existing.
Ideally chop out all the plaster there as it looks as though it's ready to fall off.
If not fill with filler/plaster, with a fine coat to finish,...
You could cut through any overlong pieces with an angle grinder........or, as it's unopened, possibly return it.
Use a scribe, a pencil and a length of scrap wood will do. A hand saw cuts on the down stroke so no need to transfer the markings underneath.
Try cleaning first and then lightly sanding the paint with 120 wet and dry paper; I have found that gives enough adhesion for modern paints. An...
I would solvent weld a spare piece of soil pipe (or other plastic) onto the redundant hole.
And use the angle connector, rather than tap in to...
I would chop off as much as you can. How deep depends on the type of patio but below the base layer should suffice, whether the blinding sand or a...
Given the property is an investment it would be worth seeking retrospective planning permission/CA consent.
Go the local government ombudsman, officer ignorance is not a legal defence AFAIK.
The doors look nice and worth keeping.
You could first remove or sand the paint which may in itself relieve the sticking. Or, if not, go on to...
Arco do a good range and for the given size fit well.
Check out David Savery's youtube channel, have never used him but he seems to have the respect of his peers.
Is the scope of the "full EICR" really excluded by the British Standard that you quote?
B.S 7671 - at 653.2 - requires the EICR to include...
They are more a helpful starting point than a physical boundary intentionally moved for gain though.
Is it within Makita's three year warranty?
The boundary position might be clearer if your neighbour's land has registered title.
Separate names with a comma.