Calm yerself :roll:
I take it back. . For some reason I was thinking the heat ex legs with the sensors on were outside. I'll slap my own wrists
Ntc sensor aren't located inside the combustion chamber
T.couple is the copper coloured thing that sits in the the end of
the pilot flame. The flame doesn't come out it
If it's a new t,couple (fitted and tightened correctly) and a good flame and still keeps going out it sounds like a faulty gas valve.does it keep...
Pilot injector may be choked,does the flame look o.k. the pilot top (popes hat) aims the flame onto the.t,couple can face slightly off or burn...
If it's microbore the pipes should bend into place. If it's 15mm there are extension bars but they look awful in my opinion
top yer pressure up before youre back on here on new years eve with no heating and hot water :lol:
Sounds like the jumpershield is knackered
Check the jumper on the back of the lp112 is on p also.
Have you set the timer settings and required temperatures?
the solum hasnt been filled in as per drawings. thats the old stairs and its just visquine onto soaking dirt
its hard up against the joist, that head will never come off :shock:
Part K compliance ..
would building control come and do a visit if i requested ?
Nothing stopping you turning it off ( word of warning, the on/off knob on lineas break very easily). Time to get hw would increase slightly but...
dont fancy cleaning a choked trap :lol:
theres a jumper on the pcb j6 that disables the preheat.remove that,keep it though
whats my next move here then? and dont say charge my phone
rough price to fix ?
Separate names with a comma.