Are rust spots on a flexi a cause for concern?
Have you fit one similar to the picture?
Does any on know if you can buy the flexi for wirquin concealed cisterns. Have some work to do on a concealed cistern toilet. And the flexi has a...
What gauge screw would go best with the sx8? A 10?
Thanks so these should give a strong enough fixing?
You mean these?
It's for a vanity like this legs at the front, fixes at the back to the wall.
What give as strong fixing through a plasterboard and tiled wall? Thanks. There 300mm by 300mm tiles
I have a couple of sottini toilet seats to replace. I know the d shaped ones are a pain as there all slightly different profiles. Any idea how...
Does a 5 litre under sink heater require the same safety defices as a 10 litre one thanks
It moves on the nut in the cistern
Is it normal for these type of fill valves to be loose on the coupling nut shown in the picture. I. E it spins from side to side. Thanks.
That's it. I am thinking of swapping the concealed cistern for a fluid master one that ia 25mm shorter and raise the cistern as high as I can.
It's already got one of them fitted.
Id say about an inch at least its going in the to pan a huge angle. Which is obviously causing a leak. The knuckle bend is as tight as it can go...
It's as tight up to the knuckle bend on the flush pipe as it will go.
It's a single unit for the concealed cistern. The basin is on a different wall. If I got a new unit and cistern is it likely the white will...
Separate names with a comma.