It seemed strange because the main photo shows it as a vertical radiator (as you would expect from the W600 x H900), but the others show what...
Used that famous search engine to search for "high output vertical radiators"
We've never bought anything from Victorian Plumbing (or Victoria...
Where's the wooden batten in relation to the insulated PB? Behind it or on top of it?
we tried using concrete screws to fix a door frame into brick.
Everyone raved about them, but they were pretty rubbish.
We ended up using Fischer...
How long do we need to leave the shuttering in place please? Max 90mm x 20mm ?
do you mean fixing stuff eg shelves,cabinets to the insulation backed plasterboard?
So paint the room side and top of the metal cill with the bitumen paint?
The finished floor level will actually be about 20 mm below the top...
Is screed sand the same as sharp sand?
There's a DPM under the concrete floor, but the floor is slightly (about 10mm) below the...
Anyone else help with this please?
sorry you can't really see the broken face. I'll move the ply and post a pic.
Thabks Woody. I managed to avoid the temptation of online poker. This is with some ply in place.
We're looking at blue circle...
Recently had our UPVC back door replaced and when they took out the old door frame they broke the concrete threshold/step that it sits on.
All done now. Cheers everyone(y)
had a few bananas and imprinted/dented plasterboard/insulated plasterboard
or we could fix a small batten, push fit/glue 25mm PIR, then 9.5mm plasterboard over the top,screwed to the small batten behind the PIR?
Well it's a conundrum for us!
This is the last bit we have to do and not sure of the best way to do it
We've got 37.5 mm insulated pb ( or 25mm...
Went out to have another fight with it and it's latching now. It's a bit fast, but not adjusting it ATM. Thanks for your help
Separate names with a comma.