You cannot boil brake fluid (in a brake system), but you can boil the water that the brake fluid absorbs over time, when this boils it creates...
What about the lifting capability of a the roof beam? It does not look like a lifting beam.
What size cable runs from the supply to the outbuilding?
How is it protected?
If the flat had the sockets and extensions installed during the build then it should be for the builder to sort out.
It would be still interesting to put a water level on the brickwork and take a photo at each end.
Lasers and their operators are not infallible.
Have a look at these
The ads I can find advertise the dimension as a "centre to centre" distance.
Cut 100mm off each rail, adjust brackets to suit.
Turn it off, or put it in Airplane mode.
Copy of user manual here http://www.samsunggalaxys4manual.com/ , have a look at call forwarding and set...
They save time when using the shower
The quietest fan would be an inline fan in the ducting in the loft away from the bathroom.
Start with a 4mm bit, then increment up in 3mm steps, easier on you, the drill and easier to drill first hole in the correct position.
I would try any steel stockholder close to you, they might give you access to their offcut skip for a £5
Dunno, but it makes sense to me to put shims under the whole of the contact face of the beam.
They are called "Roughneck Fencing Pins" at Tradepoint (B&Q).
What size of router and what sort of jobs are you hoping to do?
Well, maybe sleeving would be a better suggestion
Is the door closed properly?
If you press on the door, does the error clear?
Have you tried connecting up as they were originally?
Access panel for pipework from back boiler to tank in loft?
Have a look in the loft to see if any pipework or tanks are up there.
Separate names with a comma.