Definitley didn't miss putting anything back in such as the spring?
Is it acceptable to use cement board over a second story external timber wall then render over the cement board ? Or any other...
He might be ok with a coke bottle or a coke can if thats what he's into.
+1 looks like a standard 4 or 6 panel moulded internal door......
Hope it wasn't a 10bar drop. Fook me.
Ahh ok cheers, so basically they SHOULD of framed round it? What'd be the best way of repairing providing the trimmers are there? It was a bodge...
After removing this breast will it leave a cut end truss behind? Chimney was added on as an add on after the house was built.
At the risk of sounding blunt, your RGI will know the answer to this
Or alter pipework to suit :cool::ROFLMAO:
Stick with your battery Carbon Monoxide alarm. Check its in date, and away you go.
Don't see why it wouldn't work however as you've already stated it should of been a single channel.
Hardie all day..stagger the joins so you don't have 4 corners together and tape the joins with whatever adhesive your using.
Wrong, you did disturb the combustion chamber seals as that casing forms the seal hence the need for safety checks to prove it's all satisfactory....
Imho maybe he's got the thoughts of your family or whoever you live with (if anyone) as it's their lives you put in danger as well (y)
Just spray it I would. If he asks you tripped and spilt some of the weedkiller and your really sorry.
Start with basics...filling loop passing ? Is it external or internal ? Disconnect it.
Is that 2nd picture heating on or off ? Is the prv (little...
On what grounds? The op wants to skimp and not pay for a vertical flue or relocate?
How is the boundary not facing the terminal ? It's either running along side it or facing it ? Both of which are stated above. Can you not...
And when they pass on/move out and someone else wants to move in/build an extension etc etc
Relocate it or pay for it to be flued vertically....
Point 6 (table 4)
Separate names with a comma.