No. No zone 2 light was Illuminated. I'll go have another look tomorrow and get some more info. It's been a long week! Thanks so far all.
Replaced
I'm not round there at the min, but from power on basically everything lights up at once then goes off, and then when the double beep stars...
Hello, My neighbours have the above alarm in their rented property. It recently started nuisance alarming so they removed the fuse from the FCU...
Hello, My (very old) boiler is not firing up. Reset button is in, and holding. Fan runs. Air pressure switch changes state when fan is...
Hello all. I'm wanting to lay a new floor in my front room. The current sub-floor is 22mm T&G chipboard flooring, the floor seems flat and is...
Sorry to jump on this. Can I assume then that the new tools are not backwards compatible with the 3.0 batteries either. My BHP451 gearbox...
Excellent, I like the stair rods! Last time I used screwfix own brand stair protector, I left it on the stairs and the route to the front door...
It was corrected, it was glanded into the panel like it should have been. When I looked up the Cu equivalent of the armour, divided it by 40...
This is the incoming supply to a power press that I've been called to a fault on this morning. I've had time to write this post because i'm sat...
If electronics is your thing, and your meter has a pulse output....
Oh an also, Rockwell came back to me; 32A AC-1 contacts can be used as 25A DC-1 contacts, so happy days
I won't be, I'll simply be having my device e-stopped by the machines existing e-stop circuit. Even If I created my own e-stop controls, I'd...
:? http://www.diynot.com/forums/electrics/batten-holders-questions.360189/#2725514
Unfortunately the 24V cannot be switched off completely as its used for many other functions in the panel, including feedback from the very...
Thanks John, You are probably correct, and as I say. My gut feeling is that I'll be ok, due to the nature of the load (solenoid valves, which...
The contactors are forcibly guided safety contactors that are in an existing installation, I would like to use one pole from each contactor in...
Hi as above but with some further details. Say I have a contactor which is rated at 32A AC-1 at < 690V is there an appropriate derating factor...
An Electrician who happens to have a swimming certificate, obviously
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice