For anyone who might have a similar shower. I was looking through images on a google search and found a shower head that looked similar. Emailed...
They have had a look but can’t recognise it.
Just putting it out there to see if anyone here knows it?
Thanks guys, job on stop for the moment.
[ATTACH] [ATTACH] [ATTACH] Hi guys, can anyone please recognise the make of the shower tower panel in the pictures.
Customer needs a new knob and...
Client obviously has the security code, but doesn’t know the engineers code.
I’m assuming we are in for a bit of noise? Or does the...
Thanks both for your replies.
The alarm is working from the keypad upstairs.
From that I’d assume pcb ok?
Yes, they aren’t too expensive, the...
Thanks in advance for anyone that might be able to help.
The house I’m working on has the alarm running off the lighting fuse. So every time I...
Thanks for your reply catlad.
I’ve edited post, flies was flues!
A standard clay air vent would mean removing bricks. And the bricks don’t line up...
hi guys, has anyone had a previously capped chimney stack which required venting?
I don’t want to remove bricks as they don’t line up with the...
Job and knock , and foxhole, thanks for that. There might be light at the end of the tunnel.
If not you might be right footprints!
I used the following utube clip to diagnose.
I’m not sure whether my blade spun, but I came to the same problem source without as much...
Thanks for reply, the blade wobbles regardless of load.
The only thing that could possibly have caused it is that the blade jammed during an...
This is the flange required.
I can’t see any distortion!
Thanks for looking Eddie. Unfortunately it’s the inner flange I’m looking for. That’s was is so frustrating. Other parts are available....
Hi guys I wonder if anyone has had the problem I am encountering with getting parts for my Dewalt 110v saw.
Mine is a DW708 type 3.
Thanks for your reply SFK.
I tried rolling the keep metal but there isn't enough tolerance to allow the latch past the metal side even without the...
Hi all, been stumped by fitting a rim lock for a customer replacing an old one.
The issue is I've fitted the lock...
[ATTACH] In the end I got a worktop from Howdens.
Customer was pleased, though it certainly wasn't a match.
Thank you both for your replies, it certainly is ancient!
Was hoping it could still be available for them!
Hi guys, I'm wondering if anyone out there can please identify this type of worktop and where I can get a length. Its approx 38mm thick.!
Separate names with a comma.