We bought a hob to replace the old one, and got a B&Q halogen hob. These come pre wired with 4mm 5 wire configuration. At the plug/socket end Two...
We have installed a new floor in prep to for a solid wooden floor. The base consists of 100mm insulation topped with 22mm caberdeck boards, we did...
Had bi folding doors installed earlier in year, pre COVID. We lifted the inside floor by installing a DPM, sandblinded to level, overlayed 100mm...
Have tried a crude paint sketch hope this makes sense
Hi all plastering noob in need of help. We have a re skim job to do at home. we have a cavity wall that had been clad with boards all around as...
As some areas patched are around 2ft square, would it be easier to fill in with multi to the original ceiling level, then blue grit all over and 2...
Has been skimmed with board finish
We have cut holes on the ceiling to access pipes and electrical wires. We have filled with new plaster board, with a view to over skimming the...
Afternoon All wanted advice on the plaster B&Q are stocking, Make good. I have a suspicion what the responses will be but want to be sure. With...
Will do thankyou
We have lifted up the flooring under our stairs, via 150mm ecotherme covered with 22mm caber deck. We will be using as a washroom with a washing...
Afternoon all, we are trying to work out how many down lights we need for our new extension. We have looked at various websites but get...
we had our meter moved several years ago into our garage. we are now converting our garage to a living space. This meas moving our boiler. I have...
We have adjusted the door, but there is a small gap on the top left, how do you alter hinges to pull it tighter to the frame if possible?
We had painted our walls with valspar sheen paint and looking to re paint. There are a couple of areas that if you want can pick at the paint edge...
We are having to move some pipework in our house. Is it acceptable to link radiators together form there tails or do you hve to run each pair form...
We have a garage that has been dot and dabbed. It has had rather a lot of board adhesive behind to get over the walls, some areas 1 - 1.5 inch....
Help please, we are at the point of ordering a new composite door and frame. The old door was poorly fitted and unsightly, not to mention never...
Already in, probably the last few bits of crap for the builder's merchants. Will post on the DIY disasters next week.
Thanks for the help, well had a go at putting them in today. What a b*******d to do. Some of the PIR boards were 2 inchs out, like a banana. They...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice