I have no idea how I came up with that. must have been a copy/paste. Its Jesperson concrete. The 5m's are steel framed, this is most certainly...
Hey chaps. Hope you are all safe! I own a 1950's(ish) pre-fab concrete house, with a flat roof. Appears to be Jesperson block type Flat roof,...
if he's doing something that needs a tight fit, then he might a tight fit as a seal. I've used copper into alloy blocks for engine builds, and...
They, iirc, have a small house with a Filter on it, so you put the pipe into the barrel.
all pressure washers work from a water butt. you just need a small pump to gain around 3 bar to feed the pressure washer :-) i think all...
drill a 14mm hole. Reem the rest out until the pipe fits. Simples.
if its just one, Epoxy resin is the answer :-)
( in another answer, i never want anything go grow on this peice of land. EVER)
ill be bedding in a rectangle of 100mmx100m granite cobs spaced 110cm from my fence ( garden is 7mx5m). inside the rectangle will be high grade...
any advice for laying a row of granite cobs ? aiming for 100mmx100mm cobs. garden is gonna be raked gritty stuff at the start. i was...
So, my entire 40m2 patio was lifted today and given away FOC ( such a nice guy) There is net work of roots from weeds which i have started...
I've done 2. one was outside due to a cast concrete structure, the other was cleverly run into a fake fireplace feature, up through the...
yip, but it can be removed :-) anyway, doesn't answer my problem. most of the slabs have been removed, and its a network of roots under...
hollow bricks are stonger than you think we reguarly use them to install fall arrest anchors !!! resin fixings are the answer. drill the...
several questions, so i'll number them 1. Weed killer. ive lifted the old slabs from a 34m5 area at the front of my house. the weeds were...
after posting that, i went to have another look. ( had a few beers, so didn't strip it. and some XXXX stole my fluke !) Thanks for your...
Hi guys - Anyone got a link for a hotpoint WML540. Had issues over the past few weeks, firstly clothes that didn't smell right. I could only...
an eyesore ??? in YOUR opinion....... Glad to see you spend your time posting pointless messages to a 6 month old thread. Thanks though,...
after some thinking, i've decided to have the tiling done without the bath in place. Reasons: the bath panel can't be trimmed to size, so...
hmm, when you day don't, do you mean don't because its not needed, or don't because it causes a problem ??? it'd be nice to KNOW its not going...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice