If you can get that joist area level with the rest you will be fine to lay on a good quality underlay like Duralay Multitex. If you are in the...
It's hard to comment without seeing the floor but first you say it's level and now there in a 10mm difference in one area? The floor needs to be...
Cloud 9 type underlay is all you need, a 6mm thickness might be a bit easier for a DIY'r to deal with especially if using cheap carpet gripper. it...
Stairs start at the bottom and make your way up. Not all underlays are suitable for pure sticking down, best to pin the carpet on the landing...
I'm sure either way would protect the flooring, but I've always through foil side down is preferable as it eliminates the possibility of any sound...
For Laminate, Duralay TimbermateXL over concrete or Duralay Multitex is perfect.
Mohawk/Lano Lounge or sometimes known as Freedom. Will out perform any of the polyprop based yarns, costs a bit more but simply superb. Go to a...
Use a square edge profile in the same colour as the floor, or, choose a trim that compliments the bi-fold material and use that over the gap.
The thickness of the laminate does not equate to the quality or wear of the product, most laminate is 8mm ish, some is good, some is rubbish,...
Depends on the quality of the Engineered product if it can be nailed/glued or has to be floated rather than the thickness. If you want to nail...
Perfectly possible, just need to approach a company that cares about their installation services.
Carpet Tiles won't need underlay. Fitted carpet in that space is possible and would be warm and insulating. Couple of ways of doing it but...
Quality Laminate on a good underlay like Timbermate XL or Multitex would be a great option and very hard wearing Engineered wood will be pricey...
Refinishing products are available for LVT floors, usually two stage treatments. I would contact the floor manufacturer for their recommendations.
so long as the vinyl has been in the house loose rolled for that time you should have few issues, worse case you may need to re-trim it at some...
Stick down LVT doesnt like underfloor heating, it will likely discolour even with HT adhesives. just a warning, especially if you planned to use...
If you do not plan to use an underlay, you will need to secret nail the engineered directly to the 11mm ply. You still need to allow a full...
I second Dazlight, Timbermate XL underlay is superb
I can't see a way of repairing that very easily, it does'nt look like a laminate, more like a very thin veneer of real wood?
The underlay you describe is wholly unsuitable to fit laminate flooring ontop of, you need to use fibreboards or something like Duralay Multitex...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice