Hi. I'd really appreciate some advice on where to focus to fix the problem. I think the photo's speak for themselves I have put some text in 2...
I want to replace the waste and trap on this Sphynx basin. However the bottle trap arrangement wasn't what I was expecting to find. The bottle...
Hello and good evening. I’m trying to help out a friend, part way through some house extension work. Their CH system has been altered from a y...
A little odd this. All lights are on the downstairs cct. There are 2 x leds in the bathroom and a fan. On a 2 gang switch. The other gang...
Morning all. Appreciate advice on this. We had an intergas Eco RF installed in Sep 2018, it is not yet due for an annual service. When it was...
Briefly, in wall cable run with damaged end plug. I am pretty handing with fitting connectors, done RJ45 before, also quite handy with a...
I'm having a bit of brain fade here. A long, long time ago I used to set up some remote switching using full xantech kits, receiver, emitters,...
I currently use the sky + HD rf out to distribute to about 3 TVs in total. Sky costs have gone up so much. I am considering dropping it, and...
What is the best approach for something like this? There is no water running in it presently and it appears dry. It is dry weather here today...
My designs, as critiqued on here regarding flat roof / false pitch design, are light on detail. In the design it is shown that cavity closers...
I asked a similar question over in the plumbing forum but no takers on answering this aspect. I'm looking at using wet UFH in the extended area...
Is there a way to reliably calculate the maximum output possible out of a wet underfloor heating system? Can it take into account a maximum floor...
Evening All, I have an extension to be built with a warm flat roof, likely format, 18mm deck, VCL, 120mm Roof Board / PIR type insulation like...
We have an extension soon starting. The new built on single storey extension area to the rear of our property is about 20m2 internally. I was...
We are soon to do a rear single storey extension, across rear of property. Looking at doors we had designed in BiFold type doors but now thinking...
Now I've had a fault with the boiler fixed with a new control board. I've spent a lot of time looking at the thing and timing the operation burner...
Installed a nest on the parents in law's Y plan heating and HW set up. Seems to work ok. He had an old programmer mounted just below the boiler...
I've got a 10 year old combi boiler and for the last 3 years have used a Honeywell CM927 programmable thermostat, which, to be fair, does keep the...
So I recently did some work replacing rad valves, replacing 2 x rads with broken bleed valves and used some Fernox F3 for 1 week. Since then I've...
This is probably easier than tying a shoelace for those that have done it recently or those in the industry. But I've been looking at it for a few...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice