Search results

It is auto defrost / frost free . I had a look at the freezer evaporator . Was a lot of ice on it and what I’d call the “pipes “ coming off it with some electronics on we’re totally frozen over. ..so it’s prob not running the defrost . The fan doesn’t kick in ..

Hi as above freezer alarm went off for up to about -8 degrees . Fridge is always fine . Over night it seems to have Resloved but the alarm has been going off every now and then for a while . Anything I can check diy ? Have a multi meter etc

Hi all As above I need to replace a glass panel in an internal wooden door . Trouble is it looks like the glass is integral in the door and seemingly there’s no moulding that’s nailed in to hold the glass in place .it looks more like the glass was put in before the top of side panel of the doors...

Good evening all . I am planning on removing my current bathroom floor and wall tiles and replacing them . The walls are solid ie not plaster board. Not sure what the floor is yet . After I’ve pulled the old tiles off what prep do I need to do to the floor and wall if anything ? Do they need...

Hi all has anyone used one of these kits before ? Suspect faulty mixing valve but unsure as to where the replacement wax goes ? Cheers

The temp at the gauge at the red valve to the right of the pump used to go as hot as can be , now it won’t get above 45 at best if thst

Well up to the pump it’s hot , coming out it’s not if that makes sense..you can feel when the boiler comes on as the pipe before the pump cools a little then gets almost too hot to touch when the boiler fires up . To the right of the pump at the Manifold there is hardly any change this is the setup

Just as an addition , the flow temp just before the pump is really hot so it’s much higher than the 40 odd that’s getting to the manifold

Hi all . All of a sudden my ufh doesn’t get up to temp . Boiler fires up but between the boiler turning off when it reaches temp ans then the 2 minute off and then off when it reaches temperature , the return from the ufh is so cold , that the flow to the manifold never gets hot enough and hence...

Agree, poor form from the person installed it

Thanks yeh I was gonna do pretty much that the weekend

Yeah I’ll bodge something

Thanks , Unf I need to be able to screw either side of the pipe

Thanks might have to do something like that if I can’t find anything ready made

Can’t seem to find any that are suitable . My pipe is about 12mm off the wall . Smallest clearance I can find is 20mm . Any thing you know of that fits the bill? Thank you

Thanks ..

Thanks a lot . I got some plastic clips by they still flex and don’t hold the pipe that well if you want to pull the magnaclean off using the quick release ..

Hi all . Had a magnaclean fitted but need some pipe clips/ clamps that I can fit and screw on either side of the pipe as when taking the lid off the pipes twist a fair bit and make the joint at the boiler weep a little . All the stand-off type clips I’ve seen at wickes etc are too far from the...

Hi thanks . From what I gather that’s because the chemical in the x400 that holds the rubbish in suspension in the system water breaks down after that. .. maybe it’s also a safety thing (?)

Hi all as above ,will there be any I’ll effects to the pipe work if i don’t flush and refil a systme after using x400? If the systme re sludges that’s something else , I’m not sure it was the issue in the 1st place , but ...