Thanks for the advice - ill stick to just lightly spraying the mot and leave the clay dry Regards the slope - it's needs to have a run off for...
So - my clay soil is now relatively level with a few high spots and a few soft spots. Plan is to compact MOT with a whacker this weekend to get...
Morning all My garden is sloping and quite long. I have leveled the bottom area (roughly 20ft x 20ft) which is all heavy clay soil. I am...
Roughly what sort of price difference are we talking?
Hey I am going to be putting in a sleeper retaining wall and raised beds next week. Should i go for hardwood or softwood sleepers and what's...
Thanks for the advice. I have a few builder friends so I may get one of them out to lay the base For now I just need to keep digging :-(
I am levelling a section of my garden (around 10m x 10m) in order to lay a patio on which will be a summer house housing a hot tub etc. The...
My 1950's semi has an outhouse, the floor of which looks like it sits below the dpc of the house. The room is single skin and cold so currently...
Thanks guys Well wickes sell cellotex general insulation board and also cavity wall insulation board. Which one should I use? If I have a...
just in case it isn't clear from what I said - I assume the insulation will be going in the cavity between brick and plasterboard which is created...
My house has cavity walls which all have cavity wall insulation. On the side of my house is a single skin brick utility room with a pitched...
One more question - my plumber said PVA the walls - should I do this or apply without PVA? One wall is sand cement render and the other is old...
Thanks My tiles are 30x40 ceramics so they are quite big. For the floor I've used bal rapid flex but it's pricey - I paid the price as it is...
Hi guys Bathroom is almost ready to tile. Ive done my homework and have a few questions which I hope you can help me with. 1. One of the...
Lol Thanks for the advice. I will offer up the bath again tomorrow and do some more accurate measurements. One of the reasons why I like...
Hi The gap for my bath is about 1710 and my bath is 1700 so if I were to tile down to the bath I will have a gap at one end. I could tile...
one more question I've ordered my galvanised screws (25mm no6) and hoping to get cracking this weekend. Can I use a countersink drill bit on...
Hi I am tiling the bathroom floor which is currently boarded. I have repaired the boards and punched the nails down. I am ready to fit my...
Thanks for the response - I haven't had the boards up yet and hadn't even thought about which way the joists run so I will have a look tonight...
a house i am renovating has a cast iron bath at present and i want to install a shower instead. the shower will need to be against the opposite...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice