Hi all, I've fitted a new shower tray into a recess, however the walls are out of square and I have a 10mm gap at the widest point between the...
Thanks all.
Hi all, I'm in the process of fitting a new shower with a fixed shower head. I've mounted an elbow plate to receive the half inch thread of the...
Not an open fire, but a gas, coal effect fire.
A new chimney pot was installed when the stove was fitted, this was the original cowl that was fitted on the chimney pot: Cowl1 by mattrgee...
Yes, will get a picture. I think you're right to a point, however, in mind there shouldn't be any point where material can gather, whether it be:...
I'm not sure there are any liners that could go through a 6" wide clay liner.
Yes, definitely correct, there's no hatch. Either side of the clay liner is brickwork, there's no chimney to sweep, the only thing to sweep is...
Hi all, We had a woodburner fitted during the summer, all above board, certificates issued etc Not long afterwards, during heavy rain, water...
Hi all, Is this the correct inhibitor for a pressurised central heating system? It's fed by a Viessmann 100-W with 11 radiators. Thanks Fernox...
Hi, The wood burning stove we are looking at is certified for a 12mm hearth and will be installed in a fireplace recess. Consequently, is a full...
Some better pictures. 2D5B9344-1131-438A-9B70-91F97E2580C3 by mattrgee posted 5 May 2019 at 8:33 PM EF471EB5-C168-4C31-8612-33436C1AFC2C by...
Some progress made. Back to the original back wall of the fireplace now. However, I still need to increase the height up to the lintel. Maybe a...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice