1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Search Results

Search Again
Page 1 of 2
  1. Lancashirelad
    Post

    Suspended floor anchor bolt spacing

    Thanks woody. Where are you getting those figures?
    Post by: Lancashirelad, 22 Aug 2020 in forum: Building
  2. Lancashirelad
    Thread

    Suspended floor anchor bolt spacing

    It is proposed to create a storage room utilizing the roof void above an integral garage. The span is 9' (2740) Plan to use 6x2 (47x150) rough...
    Thread by: Lancashirelad, 21 Aug 2020, 2 replies, in forum: Building
  3. Lancashirelad
    Post

    HRM Wallstar won't ignite

    Pleased to report boiler hasn't missed a beat since. :D I'm confident enough that I even put the weather cover back on today. A few years...
    Post by: Lancashirelad, 3 Jan 2015 in forum: Plumbing and Central Heating
  4. Lancashirelad
    Post

    HRM Wallstar won't ignite

    Interesting Tibbot thanks. By the way for anyone who hasn't checked lately kero is down to around 38p. Haven't seen that price since Feb....
    Post by: Lancashirelad, 1 Jan 2015 in forum: Plumbing and Central Heating
  5. Lancashirelad
    Post

    HRM Wallstar won't ignite

    Thanks guys. Snb I can't access that site without declaring I'm an engineer - though I don't suppose they're going to come & knock on the door and...
    Post by: Lancashirelad, 1 Jan 2015 in forum: Plumbing and Central Heating
  6. Lancashirelad
    Post

    HRM Wallstar won't ignite

    Thanks for the tip re the Riello burner. It was the price that had attracted my attention. That is certainly a concern as from what you say it...
    Post by: Lancashirelad, 30 Dec 2014 in forum: Plumbing and Central Heating
  7. Lancashirelad
    Post

    HRM Wallstar won't ignite

    No simb82 you aren't invisible and thank you for the suggestion. Just difficult trying to keep up with all the different input whilst also dealing...
    Post by: Lancashirelad, 29 Dec 2014 in forum: Plumbing and Central Heating
  8. Lancashirelad
    Post

    HRM Wallstar won't ignite

    Oilhead I'll get back to you on that. My Tuesdays are usually rather busy so I don't know if I'll have chance to mess with it tomorrow. Its...
    Post by: Lancashirelad, 29 Dec 2014 in forum: Plumbing and Central Heating
  9. Lancashirelad
    Post

    HRM Wallstar won't ignite

    MANDATE where can I buy a gauge for a tenner? I will check gap tomorrow, but yes its currently much wider than 3mm but always has been....
    Post by: Lancashirelad, 29 Dec 2014 in forum: Plumbing and Central Heating
  10. Lancashirelad
    Post

    HRM Wallstar won't ignite

    Hi John. Yes I'd noticed when testing in free air, when I widened the electrode gap to try to give a bigger spark, because of the kink in the...
    Post by: Lancashirelad, 29 Dec 2014 in forum: Plumbing and Central Heating
  11. Lancashirelad
    Post

    HRM Wallstar won't ignite

    Despite the slight dampness at the joint it can (hopefully) be seen there is no air at all in the supply. Bernard this boiler has previously...
    Post by: Lancashirelad, 29 Dec 2014 in forum: Plumbing and Central Heating
  12. Lancashirelad
    Post

    HRM Wallstar won't ignite

    Post by: Lancashirelad, 29 Dec 2014 in forum: Plumbing and Central Heating
  13. Lancashirelad
    Media

    Untitled

    Uploaded by: Lancashirelad, 29 Dec 2014, 1 comments, in album: hrm wallstar
  14. Lancashirelad
    Media

    Untitled

    Uploaded by: Lancashirelad, 29 Dec 2014, 1 comments, in album: hrm wallstar
  15. Lancashirelad
    Media

    Untitled

    Uploaded by: Lancashirelad, 29 Dec 2014, 1 comments, in album: hrm wallstar
  16. Lancashirelad
    Media

    Untitled

    Uploaded by: Lancashirelad, 29 Dec 2014, 1 comments, in album: hrm wallstar
  17. Lancashirelad
    Post

    HRM Wallstar won't ignite

    Thanks for your reply. I don't think there is a non return valve fitted, unless its integral in the pump. This boiler has been in situ 21 years...
    Post by: Lancashirelad, 29 Dec 2014 in forum: Plumbing and Central Heating
  18. Lancashirelad
    Post

    HRM Wallstar won't ignite

    Thanks for your reply. The tip of the electrodes are about level with the front of the nozzle. Should they be slightly further back? I'll try to...
    Post by: Lancashirelad, 29 Dec 2014 in forum: Plumbing and Central Heating
  19. Lancashirelad
    Thread

    HRM Wallstar won't ignite

    Hi all. Would appreciate your thoughts on this as I'm currently sitting in a very cold house. Apologies for the long post, but need to present the...
    Thread by: Lancashirelad, 28 Dec 2014, 30 replies, in forum: Plumbing and Central Heating
  20. Lancashirelad
    Post

    Split load consumer unit wiring

    Right guys if we could get back on track please and drop the off-topic BS. Scoby_Beasley & securespark If you reply I won't be able to see it as...
    Post by: Lancashirelad, 30 Jan 2013 in forum: Electrics UK
Showing results 1 to 20 of 31 Next >
Search Again
Page 1 of 2