Spotted something else. I dont know whether to be concerned but no one want streaky walls on their house. This photo shows some streaking...
Herewithan update. Looking at other houses in the same estate, some of them have gable ends with boards and over-hangs. Those with boards and...
Ah, I see, thanks you. Yes, I will peg some boards down to hold the poured concrete.
Are there any fixtures on the roof like a velux skylight or a vent pipe that protrudes through the roof. I had a leaky roof 2.5 years after the...
By shuttering, do you mean cladding? If so, the exposed walls will be cladd with treated Shiplap with Tanalin. The walls at the vary back will...
How about this - Concrete - 10cm DPM Sand - 7cm Rubbble - MOT - 15cm Sorry about the rudimentary drawing. [ATTACH]
OK - I hear you. I will have a rethink on the base and rework the depth with MOT. So a concrete base sounds OK in itself - I can work with that....
Hi all, I am planning on building myself a new 4.8m by 2.4m Shed/workshop. I want to build a decent shed that will last. I know that to make...
I just want to share a good news story about a builder I engaged. Three years ago my wife and I embarked on a loft conversion project and sort...
I am about to start building a shed and am planning the roof. I have decided on a flat (1 in 12 pitch) roof with 18m OSB boarding and EDPM on...
I was thinking of a 2 in 12 pitch which is about 10 degrees.
Thanks Andy, Is there a reason you say that? Cost? Wont cure in the winter? Too much of a slope? Felt is a bit fiddly and I just though...
Building a chicken coop and thinking of slapping some GRP resin on the sloped roof for protection. The roof is two sheets of T&G OSB. Is GRP...
Thanks all. Used a PZ3 and got much better results. So thanks all. Now furnished myself with a set of DeWalt PZ3s.
I have been using Dewalt PZ2 drill bits in my drill driver. I have been driving in 100mm length screws (self tapping) into wooden posts and have...
Thanks Mottie - that looks like the thing I need.
I am rebuilding the shed at the bottom of my garden and am looking to provide it with WIFI. It already has power and I use a netgear powerline...
Definitely not getting rid of it. The base is in good shape but the deck has totally disintegrated and so will not even make a template....
When I was a young lad, I remember my Dad getting a Black n Decker workbench. It was a big moment and that piece of equipment lasted several...
Fantastic - that is my new blade sorted.
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice