no, the rads are fine but the hot water tank running from the rads isn't heating up.
I have recently added a new radiator to a hairdressers I do some work in. They use the combi boiler for hot water in the salon and a hot water...
The service valves need moving hence the need to turn everything off. Thanks
due you mean just turn the cold off? or will there be a tap to turn the hot off as well?
Hi guys Just a quick question, I am replacing a sink and taps tomorrow. They have a mega flow system what is the best way to turn off the hot...
I have recently fitted a crossfire shower valve (from the bathstore) The previous shower was fine but the bathroom needed updating. My question...
Bit of a long shot here but I have been asked to fit a the above valve (DE0004rc) is the part number. It doesn't come with any mounting plate or...
Yes that would work, but I was hoping to remove all the chipboard and replace with 22mm ply as the floor is going to be tiled.
I have a bathroom to refurbish and the chipboard floor isn't very good. I am going to replace it but as the house is quite new it looks like the...
there is a gate valve on the pipe that comes out the top, would that be it?
I am replacing the bathroom sink and the hot and cold have no service valves fitted. Is the best way to turn of the hot turn of the cold and let...
the waste goes over the joist at the mo as the old shower tray is about 100 deep. The replacement tray needs the waste to go into the floor void...
As post is this ok? It is a new joist in a new loft conversion. Also the shower waste has been vented, what is the purpose of this?
I have been asked a question by a friend that I cannot answer. They have renewed the tap in the kitchen and now when they turn the tap on the...
Thank you everyone for your comments. I have spoken to the customer and as he is also having the drive way reshaped and resurfaced so new drains...
I am quoting on a job that requires a bedroom to be turned into an ensuite. The waste all runs down the opposite side of the house and the joists...
I am also thinking of getting one of these, really want a transporter but not sure the budget will stretch that far. Can you get a piece of...
As post, I am looking for some 3rd party liability insurance and wondered if anyone had a policy they could recommend? Thanks
Hey Guys I have been installing a wall bracket for a 50" lcd tv. It is attached to a square of ply which is attached to the metal stud work...
thats great thank you, just wanted to make sure I wasn't being fleeced! Thank you for the quick response.
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice