never thought about that.
whats the best combi oil boiler on the market for
price + quality + reliability + burning effieciency
say 36kw or by brand
im finding reclaimed 1.2 m x 2.4 m x 100mm insulation boards online for £29.
it's too expensive.
Does anyone know a supplier or an equivalent...
The heating is still working as expected.
Can't tell if the radiators are slightly less hot than normal becasue each time I check them the set...
I have tried removing the white plastic thing.
Removing it does not allow condensate to flow.
No changes have been made to any boiler settings....
I installed it myself.
That said it has worked flawlessly apart from a periodic & sudden depressurisation problem that no engineer has been able...
We have a Grant Vortex 36Kw combi keroscene burning boiler,
which has two expansion vessels fitted to the heating side of the boiler.
I get that entireley. Thank for your wise comments. However I'd still like to know as much about this as I can.
Because as I...
House service fuse box outside flat.
Fuse box shown has live wire from street coming in and then out the top, as shown, for flat and neighbour....
I am replacing kinked iron cable.
Crimps joining power lead inside iron look like this.
Anyone suggest where to get these or alternative?
Need to do a job where there is no mains power.
Anyone any experience with this sort of thing for prolonged use with car engine switched on?...
Thanks. I've got those and another set too.
A ring saw would be ideal but they are too expensive. Likewise a diamond chain saw.
Thanks for that. We tried building up the bit size from smaller to larger hole. This does not work at all when hammer drilling into granite. What...
Drill bit I am using is Irwin Speedhammer Plus 14.0 mm x 210 mm.
I am going the full 210 mm in.
I have tried lots of different drill bit brands on...
Because after drilling 30 or so holes in granite with 14 mm carbite tipped drill bit specially designed for granite, the clutch in this drill...
Looking for a hammer drill for a lot of granite drilling.
Needs to have 3J impact energy, or there abouts, and be completely servicable.
I can make the holes in the steel and the granite fr attaching the bolts no probs.
I've heard about epoxy systems etc for gluing bolts that hold...
There are holes. What would you do with them
Have a garage.
Corrugated steel external wall is rotting.
Need to clad it with weather proof cladding that won't rot.
Here been to GAP plastics....
63A or 6A trips when lighting circuit switch is activated. Photo of breakers attached.
Separate names with a comma.