Hi all, I'm planning on adding a short block paver apron between the footpath and my gravel driveway. My question is about how I keep the pavers...
Hi all, I’m after some advice on a condensation issue I’ve got in my recently built shed. I’ve read various forum posts but can’t seem to find a...
Decided to leave this area for another 6 months or so, didn't fancy taking the risk.
Hi all, I've started working on a 3x6 metre porcelain patio out the back of our house. I've dug out to around 150mm below finished paving level...
Good shout, will definitely do that.
That's a good shout, a bit like a French cleat system. I actually make the adjustments yesterday and took a while to get it all square and to...
How do you suggest I fix the wall unit to the wall? The fixings are attached to the back panel so by cutting out the back I'll be removing the...
Not clear what the back is stapled into. Can only imagine that staples are angled so that they staple into the top and bottom of the unit. A...
Sorry, not sure exactly what you mean?
The pillar supports a steel for an extension so can't be adjusted. Afraid the tall unit can't go there as there needs to be a worktop to left...
Too late for that I'm afraid :)
Hi all, Just started fitting our new units from DIY Kitchens. There's a pillar that comes out of the wall by 11cm and is 66cm wide. I'll have to...
Thanks very much all for your feedback, it's been extremely helpful. I managed to grab building control when they came round yesterday and, along...
I thought the haunching would be made visible as cars/people shift the gravel around? If the pavers are a couple of inches thick that doesn't...
Hi all, Planning on turning our concrete drive into a gravel drive with block paver path leading to the house. I was planning on doing the path...
Hi all, 5 years late to the party but if anyone comes across this post, wondering how to clad their pre-fab garage, I've done a blog post about...
Thanks for the details, Tony. What would you recommend as next steps? I've shared my concern with our builder but as expected he's played it down...
Thanks everyone for the feedback. Sounds like it wasn't done particularly well and there are some concerns. Do you reckon I should ask builder to...
Thanks Tony. So do you reckon it would be a case of just being made good rather than a structural engineer having a look? Appreciate it's...
Here's a couple of photos of when the steels were in position but still supported by acrows until padstones were added/had cured. [ATTACH] [ATTACH]
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice