Chain would be easier as bolt can be levered open on a large gate.
Or you reduce the depth of the first unit back to behind frame and have a step in the worktop further along .
No cat stolen and seller must have welded in a replacement section to get rid of it without loss.
"My drill won't fit as it's an old house" Couldn't make sense of that sentence.
Took the wife's car for first MOT since we had it, exhaust had section welded in after cat removal.So MOT we bought it with must have been dodgy....
Its a build under dishwasher, not built-in, stands on the floor and requires no cabinet.Just follow J&K instructions.
Template it with a piece of card and send it to them.
Right angle Ali strip would do it .
Looks like there is no protection on the underside of the worktop as it seems to be expanding above the oven.
How can you have an unused smoke detector?
Looks like pipes are touching and friction could make the noise as then expand and contract.
Its not a cure for loose wallpaper.
Use long drill bits and screwdriver bit extension. Then the angle is almost nill.
Why was brickwork treated?
Did you check hose is clear both ends and drains?
Fire rated foam for quick and easy fix.
If you carefully rake out a little adhesive from rear of tiles and clean end of tiles you can cut most of the lip of tile trim off and tuck it...
What about 1/2 glazed stable door?
Are you tiling around the corner?
Applies to entire house not just the rooms creating lots of moisture.
Separate names with a comma.