Cheers, it’s “Qboard” BandQ sell the stuff. Manufacturers say to dnd and fix with anchors. It’s up and it’s sticking anyway!
Ordered from that popular ordering website.
I left the boss alone, didn’t cut the rib out, fitted over easily.
looks like it’ll do the job, will...
Have ordered a 63mm to 40mm coupler, will have a play and see,
guess I’ve got nothing to lose by messing with the side branch.
access above is ok, as it’s all exposed anyway. Below is tricky,...
Is lifting the stack and taking this section out doable for a moderate DIY’er?
Whilst gutting a bathroom I found a leaky soil linkage. It was an odd connection using multiple diameters.
I’ve removed what I can and...
ive been having great fun clearing off a bathroom wall.
I want to stick some backerboard up. The walls are still dusty (it was gypsum)...
Nice one, I’ll shop around a bit more, thanks
I’d appreciate some advice regarding a poorly 1970s wall.
I’ve been gutting a bathroom, which had tiles on tiles in some sections, which...
Have you used that supplier before?
It’s an option. I haven’t seen many of these tho. I’d wanted a pivot door (for ease of cleaning) and there wouldn’t be room for a larger door to...
Aye, will do a bit more chin scratching
Sorry if I’ve had a senior moment above.
I want a 15cm gap to give the enclosure a bit more room away from the wall (which I’ll tile at...
I'd appreciate some suggestions regarding a new shower install.
I'd like to put in a larger unit but there is little room, as the...
checked both headers, both filling normally, :cry:
any other offers?
yep, thats what we have.
just out of interest how would a plumber vent it?
pardon my ignorance, is cylinder the same as storage tank?
couldn't see any bleed points upstairs, :(
would appreciate some help with the following.
we have a very old concord WRS wall mounted boiler in our garage. for a while now a...
if its meant to be 4mm squared then im not sure. tried to measure the widest part of the cable.
im not about to mess about with the CU,...
just been back with the tape measure,
the tricord from the CU is 4mm. shouldi still fit a FCU or just spur off the existing socket?
Separate names with a comma.