Hi, I am about to board our loft with tongue and groove chipboard boards. I need to raise the boards so that they don't compress the existing...
Hi all, Basically we have a Hoover HNMF 2605, which has a single temperature control for both fridge and freezer compartments. The problem is...
Thanks for replies, I exchanged the dimmer for the lower 250W version but still got the same flickering issues. In the end I just sourced a...
Thanks for the reply and explanation. Will replacing the switch with the 250W one not achieve the same? I would prefer the room weren't any...
Hi, We wanted to switch to dimmable lighting in the nursery so i went to B&Q and bought a dimmable halogen bulb (seems you can no longer buy...
Hi all, When our boiler was moved we were left with a large hole in the side of the house where the old flue used to be. Anyone got any tips...
Excellent thanks crockett, thats the concise answer I was after. :D
Conclusive then! :(
Really appreciate your replies, will give the plasterboard a go, thanks joinerjohn.
Hi all, Hopefully a quick one. I'm having my boiler moved about 80cm to the left, do I need to get a certificate for this? Thanks in advance!
Thank you both for your replies... Interesting idea however the mortar that you can see in the photo is completely uneven and loose and so I...
Having removed the old tiles in my kitchen I'm now left with a void/cavity below the window as shown in the photo below. We're planning to have...
We are not planning on having the room replastered any longer, sorry should have said. I believe that we've stripped back to plaster, its gray...
Apologies for raising this rather old post from the dead but I've finally pulled my finger out and are in the process of sorting this myself....
Thanks very much for the reply and your suggestions. I think I might get some quotes and I may even get the whole room re-plastered since the...
Hi, I would really appreciated some advice from you experts... Around the window area in our master bedroom the paint (might be plaster not...
I've just refilled the system and switched it all back on and every radiator is now working. Wicked, starting to feel like a pro at this CH game,...
Thats working so just draining off the last of the water now. The water is absolutely filthy so I recon it'll need a good flush through. Please...
Thanks for the reply, I've drained off from the boiler outlet and its pretty much finished now but opening up the bleed valves on the radiators...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice