I meant heaters sadia possibly but a close up of the sticker will help
It will be a bit more than an o ring
Great then I would have to pay for 5 car’s charging at night sounds like a bad deal for the bill payer.
Have you had heat loss calcs as it’s impossible to add more pipe in the floor once it down make sure you have enough ,with a vaulted ceiling you...
I fitted one of these a couple of years ago I’d swerve it if asked again total pita Cheers
Who fitted the cylinder not a G 3 installer d1 into tundish and expansion valve into d2 with no tundish the trades gone to the dogs.
Dans right will defo be the safety group that style aren’t available anymore will need to do the job properly this time.
Hi I’m just east of Taunton
Hi I’m in Taunton or close to they should be wired with two separate supplies one from off peak and the other from normal supply you can use a...
Hi there is an off peak and 24 hr connection inside it’s probably been linked to have a permanent supply get an electrician to wire in a timer for...
Are you in a hard water area if so the manifold could be scaled up but probably solenoid passing, part are available there’s a parts list inside...
Not sure how to edit but supposed to say Primatic sorry.
Hi matey goggle primatial cylinders, but your gonna have to cap the pipes . Cheers mark
Just a thought looking at your pic,s I would check for a leak around the bottom of you expansion vessel it may be dripping on to the top of the...
Hi does your system have an air separator to vent air back over the feed and expansion tank if so my guess would be that it is partly blocked, had...
I would agree with dan we have 60 sparks and would only trust a handful to wire up a system like that.
Nice job :D
Have a look in your loft for auto/man air vent sounds like an air lock in the paperwork and getting no flow air in pump bleed via big screw in...
Rob I would believe that's just corrosion probably just a small weep for years now stopped by the corrosion nothing to worry about.
Separate names with a comma.