Hi, can someone advise me please? I am having building work done, and need to disable or remove a PIR for a period. I thought I could enter eng...
hi, Anyone know what the model in the attachment is? I thought it was a 1901 but doesnt have the raised front on it behind the bezel. I'm trying...
Hi, I recently ordered these tiles from an online warehouse that said they were in stock, took my order and money. Now a week later and no...
Hi all, i have finally bitten the bullet and dug up a failed screed floor in a kitchen which i need to get ready to tile. I'm going to...
Hi, I looked at plenty of trowel questions, and most end up saying use a 20mm/10mm round for floors. BAL say use 20mm/13mm round for large...
Hi guys, my alarm started blaring at1am last night, and after a lot of fiddling and removing of power, the bell eventually drained itself flat....
Hi All, I have just laid a Travertine floor, and know that I have to seal it before I grout, and then clean, and re-seal when the grouts dry....
Hi, My old FF has developed a fault with the fridge part. It wont cool at all, yet the freezer is fine. Unit has been defrosted for some time,...
Hi, i'm in the process of renewing my old kitchen. Floors , walls, cabinets and white goods. First up is the floor. The floor is 70%...
Hi, have a 758 that the lower oven will not remain lit. I have checked the TC is in the flame, but as soon as you let go of the oven knob out...
Hi everyone Have a Whirlpool AWD049 that consitently takes in the conditioner with the wash cycle and not the rinse cycle. Whirlpool have...
Hi Anyone out there that can advise me on block paver pattern? I want to have a 105 x 140 single size block pavers installed on my entire...
Hi My mum has an old flat and the kitchen light cable is the old lead coated sleeve with two wires. As there is no earth wire, is it practice...
I have a Whirlpool ARG917 intergrated f/f. Its working fine in the lower freezer part, however the top fridge part has a problem. The top...
Hi all, Have a CSI85t thats developed a strange problem. When the heating is OFF and set to SUMMER ie HW only, the boiler fires up fine when...
Hi I have a PC thats got a blown power supply. Ive had a look and tried to repair it, but its smoked so I need a new one. Model is...
Im going to be replacing my Potterton Lynx this summer after 18 glorious years (apart from the last few weeks and the gas board but thats another...
Can anyone tell me if the air flow switch in the potterton Lynx, (not lynx 2) can be substituted for the one in the Lynx 2. The part number...
Hi, I have a Pott C80 thats developed what looks like an overheat problem. The CH fires up and the rads all get hot. However the temp rises...
Can anyone assist me please? I have an old Neff Hob with a faulty 1200w element. I bought a replacment from BSH and when it arrived, the...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice